Doug Fleenor Design: PRE10E-A Ethernet-based Lighting Controller

by Stage Directions
The PRE10E-A Ethernet-based lighting controller from Doug Fleenor Design
The PRE10E-A Ethernet-based lighting controller from Doug Fleenor Design

New from Doug Fleenor Design, is the PRE10E-A, an Ethernet based lighting controller that fits entirely into a two-gang electrical back box. The simple user interface consists of 10 illuminated buttons for scene selection and two recessed "paperclip" buttons for scene capture. Initial set-up is simplified by use of an encoder wheel and 1.25-inch screen on the back of the unit.

The controller stores up to 10 scenes, each with up to 2,048 channels (four universes) of lighting data. Fade times are adjustable from zero to 999 seconds (the default is two-seconds). Multiple controllers can reside on the same network either as completely independent devices (each supporting four unique universes) or as main/remote devices (controlling the same four universes). Powered by POE (Power Over Ethernet) or a separate low voltage supply. The PRE10E-A has an MSRP of $980.00

Further information from Doug Fleenor Design: www.dfd.com